AMC/JEEP 360, 390, 401 and 343 Rebuilt Cylinder Heads $375
Like it says, I got a set of AMC and Jeep "dog leg" cylinder heads from a 401 that have been rebuilt and were only run for engine break in. These heads are widely known as some of the best flowing stock cylinder heads ever produced by a manufacturer. The edelbrock aluminum heads are almost identical except made of aluminum. If you have a 68 or 69 AMC 390, these heads will up your horsepower by about 25%, which is a BIG difference. They are stock except they were milled to flatten the surface, don't remember how much, but wasn't a lot. They have valve springs for RV torque cam. These are ready to bolt on and go. They fit AMC 401, 390, 360 and 343 engines. They will not work on a 304 unless the cylinder is notched for valve clearance. I am looking for $375 for the set. I am located in London KY
These are going on Ebay Saturday, just wanted to give you guys the first shot at them.