Porta Band Table Saw

[Marty G]

This is the best tool Ive used in the shop we have a nice high end band saw in the shop ill walk but it to use these instead

Mark (tigman)built these 15 years ago when he was a Winston Cup fabricator. thea took them to the track while testing. The nice thing about these is you don't have to take the saw off the stand to change the blades. They have bolt holes in the bottom plate to bolt to a bench, and they also come with an angle plate to clamp them into a vise. They will be $75.00 plus shipping. We will also be offering the foot switch as well as the saws. We take credit cards.

Fab Shop Inc
Pound,Virginia
276-796-5919
276-796-5917 fax

fabshopinc1@verizon.net (fabshopinc1@verizon.net)
Attached Imageshttp://pirate4x4.com/forum/attachment.php?attachmentid=413417&stc=1&d=1231359518 http://pirate4x4.com/forum/attachment.php?attachmentid=413419&stc=1&d=1231359647

[EngineNine]

Built specific for Milwaukee saw or are they universal?

[Marty G]

Milwaukee deep throat for now

working on one for the regular Milwaukee

plans are to build them for all the porta bands eventually

[ParadisePWoffrD]

what is the depth and width of the cutting area on the Milwaukee deep throat? Id like to get something like this for mine, but it isnt a Milwaukee... also what are you using to engage the trigger on the PortaBand?

[SamuraiGuyTN]

very cool

[EngineNine]

looks like the trigger is zip-tied in the on position. I would assume that there is some kind of on-off pedal plugged in-line. Would be easy enough to do. James

[Marty G]

we use a variable speed foot pedal for the trigger
works very well you can run the speed down to make
precision cuts

Thanks Marty Gilliam

[Jeep07]

Headed to kingsport anytime soon? I'd like to get a stand and a pedal..

[TiredIronGRB]

I got one, they are awesome. Once I get it setup I'll post some pics.

[Tigman]

The next run of saw stands will fit 3 different brands of saws. The tried and true Milwaukee as well as Dewalt and Porter Cable. We should have all mounting issues with the saw variances resolved. The foot pedal is only on-off not variable speed.


Mark

[TiredIronGRB]

I love mine great for bracket fabrication.

[Jeep07]

I love mine great for bracket fabrication.
Me too!

[Tigman]

The new stand that fit the 3 different brands of saws are here! Milwaukee, Dewalt and Porter Cable. There will be a price increase also. $ 89.

Mark

[Jeep07]

These things are trick.

From UPS
1033

Contents
1034

Assembled
1032

[Tigman]

Are available for the do it youself crowd! $36 plus shipping. The plates fit the Milwaukee and Dewalt saws. The fittament issues have been resolved!!


Mark

Fab Shop Inc
276-796-5919

fabshopinc.com

[Tigman]

On the porta band stands!! They will be $70 plus shipping till the end of August!!


Thanks
Mark

[BillM]

Awesome price Mark.