Added a few things-dail up beware

[1-tonmudder]

Some of you might have noticed that I have not been around-any.The main reason was usually timing.Whenever something was going on I was either waiting on something or somebody.I have finally about got all the loose ends tied up.So here's what kept me off the trails.

I started out do a rear disc conv using DIY caliper barckets.
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_2389.jpg

Here what I started with.
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_2386.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_2387.jpg

Bought some new caliper's and since I had a good set of rotor's so I just had them turned.
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_2396.jpg

Put if all together to see if I need anything else before I painted everything
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_2398.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_2605.jpg
Bought some SS braided brake lines with 90 degree ends for the back.
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_2872.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_2871.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_2873.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_2609.jpg

Also done a sepr belt conv using parts from a 93 model 350.My main reason for doing that was to gain the stock 110 amp alt and the convience of just one belt.
Started with this
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_2025.jpg

And ended with this.
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_2612.jpg

After the incident last year at Harlan I knew I needed hydro-assist.I have the 2wd box ported and back on but have not go the ram mounted yet.
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_2602.jpg

By far the most time consuming part was having the cage put in.It went in the second week in April and I got it back the sat before the 4th.Bobby Eden did the cage and althought it took alot longer than he had planned I feel it was worth the wait.

Here's how it started out.
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3036.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3031.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3039.jpg

And this is what it looks like now.
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3923.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3921.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3919.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3917.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3912.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3911.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3907.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3906.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3909.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3905.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3903.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3904.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3899.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3898.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3446.jpg
http://i59.photobucket.com/albums/g305/1-tonmudder/Blazer%20pics/100_3916.jpg

I still have to paint the cage,put my belts in,Herculine the floor,mount my boxes,and finish my Hydro -assist.

[pplblazerdude]

Looking good Looking good man. Now lets go wheeling.

[Gordon]

That looks sweet, Steve. Great improvements.

[Hokie_YJ]

Nice, VERY nice! :smokin:

[Bluegill]

Sweet! ;-)

[BillM]

Looks pretty sweet Steve. Congrats.

[Want2Wheel]

Did that just grow in there. It looks great.

[TiredIronGRB]

Nice :smokin:

[Dino1967]

was wondering when ya was going to fill everyone in :wink:
glad to see every thing coming together
bob does great work not bad for his first off road cage what happened to the other stuff :?:

[1-tonmudder]

He got the sliders on but still has to do the tube doors.

[Dino1967]

He got the sliders on but still has to do the tube doors. :smokin:

[Hadfield4WD]

Nice work.