PDA

View Full Version : beadlock designs part2

r1ng3l78
05-13-2007, 01:00 AM
ok so it's down to 2 and 4 so i played with each a little. i also made one with text but i don't know if they would cost to cut but you can see how it looks. 5 and 6 are basically the same as their counterparts, but the designs are about 1/4" less deep.

http://i24.photobucket.com/albums/c19/r1ng3l78/prototypes/ring2.jpg

http://i24.photobucket.com/albums/c19/r1ng3l78/prototypes/ring5.jpg

http://i24.photobucket.com/albums/c19/r1ng3l78/prototypes/ring4.jpg

http://i24.photobucket.com/albums/c19/r1ng3l78/prototypes/ring6.jpg

http://i24.photobucket.com/albums/c19/r1ng3l78/prototypes/ringG.jpg

http://i24.photobucket.com/albums/c19/r1ng3l78/prototypes/ringC.jpg
DeannErica
05-13-2007, 01:03 AM
I like the grace lettering on them,I would possibly buy a set of those!
Want2Wheel
05-13-2007, 09:08 AM
I like the Grace ones.
Although The "I'M cool" ones would make me be able to do those hard climbs better.
pplblazerdude
05-13-2007, 09:15 AM
The im cool screams awsomeness.
NC_James
05-13-2007, 02:17 PM
I like im cool :lol:
TiredIronGRB
05-13-2007, 02:52 PM
We'll need a few sets that says "I'm Stupid" :wink:
pplblazerdude
05-13-2007, 05:15 PM
We'll need a few sets that says "I'm Stupid" :wink: Why is that now George?
TiredIronGRB
05-13-2007, 05:17 PM
Just because :grin:
pplblazerdude
05-13-2007, 06:03 PM
Because what?
MyBeau99
05-13-2007, 07:30 PM
We'll need a few sets that says "I'm Stupid" :wink:

Why not..... "I'm with Stupid" :lol: :lol: :lol:

Or as Forrest Gump said while running "It Happens"
Hokie_YJ
05-13-2007, 09:32 PM
We'll need a few sets that says "I'm Stupid" :wink:

:laughing6:
Marty G
05-13-2007, 11:11 PM
We'll need a few sets that says "I'm Stupid" :wink:

Why not..... "I'm with Stupid" :lol: :lol: :lol:

Or as Forrest Gump said while running "It Happens"

Im with stupid for the passenger side :lol: :lol: :lol:
r1ng3l78
05-13-2007, 11:40 PM
well i've been doodlin all weekend and really need to find out how much these would run this week. here's some more (yes the yota's not perfect).

http://i24.photobucket.com/albums/c19/r1ng3l78/prototypes/ringt.jpg
http://i24.photobucket.com/albums/c19/r1ng3l78/prototypes/ringM.jpg
http://i24.photobucket.com/albums/c19/r1ng3l78/prototypes/ringD.jpg
pplblazerdude
05-14-2007, 12:06 AM
I like those last ones.
Want2Wheel
05-14-2007, 09:42 AM
I would like one of each. I'm Stupid, 4x4 Grace, This side out, I'm saved.
Dino1967
05-15-2007, 05:36 PM
very nice
what kind of a price
SamuraiGuyTN
05-16-2007, 01:45 PM
I wouldn't mind a set with The Suzuki S
bansil
09-06-2007, 04:53 PM
Will this be local,to save on shipping?

We might be interested.

What kinda price?
Hadfield4WD
09-06-2007, 05:51 PM
How about a biohazard symbol?
Derrickalda
09-06-2007, 07:47 PM
this is a design I like

http://www.straightforwardsupplies.co.uk/acatalog/20-inch-beadlock.jpg
BillM
09-07-2007, 08:37 AM
Jarrett is local. Jarrett you could call American Mechanical, they have a waterjet they could cut these on. I think the cost is $150 per hour flat rate. May be better to find someone with a CNC plasma though.
r1ng3l78
09-07-2007, 09:07 AM
yeah i've got a guy in tx who's supposed to get me a price. waterjets do have more overhead to run than the plasmas.
TNjeeper97
09-07-2007, 09:19 AM
American Mechanical does in fact have a water jet. Rates...I have no clue.
Hokie_YJ
09-07-2007, 10:33 AM
There's a place in Blountville that has a CNC laser. Cleanest cuts i've ever seen. The name of the place in Engineering Sales Corporation.
Gubni
09-07-2007, 10:33 AM
Drake was telling me about a place that will laser cut for $100 per hour.
bansil
09-07-2007, 11:02 AM
There is a place in Pogi that has a cnc plasma they have done brackets etc. for me.

It's off of 321 toward boone.
BJack
09-07-2007, 12:02 PM
There is a place in Pogi that has a cnc plasma they have done brackets etc. for me.

It's off of 321 toward boone.
It's Poga, but where is it exactly?
Want2Wheel
09-07-2007, 08:43 PM
If anyone finds a good place for some weld on rings I would like to have a set. I will be putting them on a set of 15in wheels.
BillM
09-07-2007, 10:54 PM
Go to www.copperheadfab.com
bansil
09-10-2007, 11:04 AM
It's Poga, but where is it exactly?

lol.........almost put a couple eee's on the end.

Turn at the fire station,follow road up alittle was it'll go to the right,then there is a church on the right and it's right past there,it's before a bridge off to the left.............that should be as clear as mud.......

I can't find the phone #
But if you call Shouns Lumber,his son's run the little machine shop up in poga.
BillM
09-10-2007, 09:49 PM
If anyone finds a good place for some weld on rings I would like to have a set. I will be putting them on a set of 15in wheels.

Ask Andy's01. He had a bunch built awhile back and I am pretty sure they were around $135 or so per set of 4. Included the anti coning rings too. I could be a little off on the dollar but I know I am pretty close.
TedsOffroad
09-30-2007, 12:38 PM
Your in luck. I have a laser at work. And can get them quoted for you. The ones you have are similar to the ones I had designed for DJ Rob to bolt to his M/T wheels. The cost should be close depending on the material thickness.