posting pics

[Marty G]

every time i try to post a pic i get this

http://f3.yahoofs.com/users/41ddbce4z3f2e9399/b3ba/__sr_/75aescd.jpg?phwvBMGB9Ce72T7e

and if i remove the img tag it makes a link

http://f3.yahoofs.com/users/41ddbce4z3f2e9399/b3ba/__sr_/75aescd.jpg?phwvBMGB9Ce72T7e

what am i doing wrong?

is it the yahoo acount thea are stored on?

[Bluegill]

You've got the wrong filename listed. Right click the pic you want to post, select "properties", then copy & paste the actual properties. The link should end with .jpg, .gif, etc - not a bunch of encryption mumbo jumbo :wink:

[Marty G]

that is how im getting the filename must be a yahoo photos thing thanks

[Bluegill]

Like this one? ;)

http://i81.photobucket.com/albums/j226/shepherdskeep/Harlan%20-%20IAJ%20%204-13-07/HPIM1001.jpg

[Marty G]

i think i know that feller good pic of my blazer

http://i155.photobucket.com/albums/s281/k10guru/safemillingmachene023.jpg

[Bluegill]

Now ya got the hang of it :wink: Couldn't get a better shot of you climbing that ledge......you went too fast :lol:

[Marty G]

cool it worked i made me an acount at photobucket and it worked fine
thanks bluegill

[Marty G]

i know ive got a big right foot 13 to be exact :lol:
Thanks again

[Bluegill]

Anytime man, that's what I'm here for! :grin:

[Bluegill]

By the way, here's the only other shot of your Blaze:
(like I said, you went faster than the camera did :lol: )

http://i81.photobucket.com/albums/j226/shepherdskeep/Harlan%20-%20IAJ%20%204-13-07/HPIM1002.jpg

[pplblazerdude]

Whats the specs on your blazer?

[Marty G]

i will have to take that moter out of it if i dont build my rock buggy soon
that was only a little throttle for a real short burst
way to much for the woods
when we built it i had frinds running the pro mud bogs
i was going to go some weekends with them and have somthing to play in the prostreet class
he opened his own shop j&j racing building moters and dident have time to race any more
he use to run a buggy called nasty habbit
it was sitting on a stand in my shop for 6 years had to play with it some
make a real good tow rig for the buggy when i get it down though hills wont hurt it any (thats why the boggers wear took off)
i had to bring the compresson down on it when i put it in the blazer was at 245 know its 190

[Marty G]

its an 80 blazer with a 78 pickup cab welded into it
10 bolt 3/4 ton frunt 4.11
14 bolt 3/4 ton rear 4.11 busted factory limeted slip :roll:
700 r4 205
406 small block chevy (bored 30 over 400)
13 to 1
205 valve iron eagle heads 72 cc
ross racing pistons
chevy bowtie rods for a 350 brings the piston higher up in the cylinders for comp.
performer rpm cam
performer rpm air gap intake
truck avenger 770 carb
fuel cell holley electric pump and regulater
rotating asemble balenced fluid dampner balencer

thats most of the specs any way :lol:

[blynyrd]

its an 80 blazer with a 78 pickup cab welded into it
10 bolt 3/4 ton frunt 4.11
14 bolt 3/4 ton rear 4.11 busted factory limeted slip :roll:
700 r4 205
406 small block chevy (bored 30 over 400)
13 to 1
205 valve iron eagle heads 72 cc
ross racing pistons
chevy bowtie rods for a 350 brings the piston higher up in the cylinders for comp.
performer rpm cam
performer rpm air gap intake
truck avenger 770 carb
fuel cell holley electric pump and regulater
rotating asemble balenced fluid dampner balencer

thats most of the specs any way :lol:


How do you like that truck avenger carb? I've been thinking of getting it and a performer manifold for my amc 304 in my cj

[Marty G]

it works great in the mountains
it will climb at a steper angle than im willing to go :shock:
and idles right along in the hard bumpy stuff
but it has a dead spot i cant seem to get out of it
off ideal to 1700 rpm smouth then smoth again at 2000 and above
allmost dies in between im a pretty good carb tuner but this one has baffled me

ive had frinds with the smaller truck avengers and thea are flawless
feel as good as an elderblock might be a glitch in the 770 or my moter not for sure witch

if you need a big carb get an elderblock and install an off road kit
if you wont a 500 to 670 ide recomend the holley never seen any carb handle ruff terain like this one